Differences

This shows you the differences between two versions of the page.

--- ats:start [2024/06/14 18:29] – [Contactor-Based ATS] Alan Shea
+++ ats:start [2024/08/27 13:12] (current) – [Motor Contactor Selection] Alan Shea
@@ Line 20: / Line 20: @@
 ====Motor Contactor Selection==
-The appropriate size of motor contactors should be selected based on the load served and the genset size. The 400A frame is a good general purpose selection, but smaller or larger can substituted, but circuit breakers and wire sizes must be adjusted appropriately. Recommended source: [[https://www.factorymation.com/Contactors_Overloads_qs/Metasol-Contactors-Overloads-9-to-800A?Coil_Voltage=240V-AC-Class&Nominal_Amps=150,225,400,800|FactoryMation.com]] //(225A frame and larger have 100-240VAC/DC coils)//
+The appropriate size of motor contactors should be selected based on the load served and the genset size. The 400A frame is a good general purpose selection, but smaller or larger can substituted, however circuit breakers and wire sizes must be adjusted appropriately. Recommended source: [[https://www.factorymation.com/Contactors_Overloads_qs/Metasol-Contactors-Overloads-9-to-800A?Coil_Voltage=240V-AC-Class&Nominal_Amps=150,225,400,800|FactoryMation.com]] //(225A frame and larger have 100-240VAC/DC coils)//
 \\
 ----
@@ Line 36: / Line 36: @@
   * [[https://www.comap-control.com/products/switchgear-control-and-protections/ats-controllers/inteliats2-70/|InteliATS 70]] adds PLC logic blocks
-[[:ats:inteli|{{ :ats:e117.1_r1_auto_transfer_switch_inteliats.png?direct&600 |}}]]
+[[:ats:inteli|{{ :ats:e117.1_r1.1_auto_transfer_switch_inteliats.png?direct&600 |}}]]

MetaTek

User Tools

Site Tools

Differences

Page Tools