MetaTek

User Tools

Site Tools

You are here: start » ge
Trace:
ge:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
ge:start [2021/09/17 21:49] – Alan Sheage:start [2022/10/11 09:27] (current) – ↷ Links adapted because of a move operation 66.249.70.53
Line 4: Line 4:
  
 Some details on [[ge:diesel generators]], terminology, factors to consider, and recommended features.  Some details on [[ge:diesel generators]], terminology, factors to consider, and recommended features. 
 +  * [[ge:diesel-generators|Diesel Generators]]
 +  * [[ge:prime-vs-standby|Prime Power vs Standby Power Ratings]]
 +  * [[ge:heaters|Generator Heater Design]]
 +  * [[ge:standby-failure|Generator Standby ]]
  
 The diesel generator sets for this sample project are sized for 30kw continuous/baseload, or 38kw [[ge:prime-vs-standby|prime power]]. The [[cp:start|Control System]] will automatically start a second generator if the first generator reaches 80% of its capacity, synchronize and operate them in parallel. When the load drops below 70% of the single genset capacity it will automatically unload and cool down the second genset. If the running generator shuts down due to a fault the second generator will automatically start and carry the load; if possible (in the case of a critical warning, like high water temperature or low coolant) the load will be transferred automatically before shut down.  The diesel generator sets for this sample project are sized for 30kw continuous/baseload, or 38kw [[ge:prime-vs-standby|prime power]]. The [[cp:start|Control System]] will automatically start a second generator if the first generator reaches 80% of its capacity, synchronize and operate them in parallel. When the load drops below 70% of the single genset capacity it will automatically unload and cool down the second genset. If the running generator shuts down due to a fault the second generator will automatically start and carry the load; if possible (in the case of a critical warning, like high water temperature or low coolant) the load will be transferred automatically before shut down. 
ge/start.1631915344.txt.gz · Last modified: 2021/09/17 21:49 by Alan Shea

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki