Differences

This shows you the differences between two versions of the page.

--- reference:martin-machinery [2014/09/20 23:54] – external edit 127.0.0.1
+++ reference:martin-machinery [2016/05/27 22:45] – Alan Shea
@@ Line 1: / Line 1: @@
-======Martin Machinery===
+======Martin Energy Group===
-Martin Machinery is the integrator we have chosen to build the gensets and control system. We have worked with them on a number of projects and have been very pleased with the outcome. They supply items that you won't get from off-the-shelf genset packages, like low-coolant and low oil level shutdowns.
+Martin Energy Group is the integrator we have chosen to build the gensets and control system. We have worked with them on a number of projects and have been very pleased with the results. They supply items that you won't get from off-the-shelf genset packages, like low-coolant and low oil level warnings and shutdowns.
-The biggest advantage of purchasing from Martin Machinery is that they will build a genset to spec. Our primary desire is to have an oversize generator end for longest life. Most packaged gensets have a generator end that is closely matched to the engine size and will operate at over 120° Celsius (250° Fahrenheit) at full load! This is wasted energy and shortens the life of the generator insulation. For longest life we want a generator end that will run at no more than 150°-180° F (65-80° C). This is why we oversize the generator end, and is a major reason why we chose to use Martin Machinery.
+The biggest advantage of purchasing from Martin Energy Group is that they will build a genset to spec. Our primary desire is to have an oversize generator end for longest life. Most packaged gensets have a generator end that is closely matched to the engine size and will operate at over 120° Celsius (250° Fahrenheit) at full load! This is wasted energy and shortens the life of the generator insulation. For longest life we want a generator end that will run at no more than 150°-180° F (65-80° C).
+Martin Energy Group also has extensive experience in building gensets for prime power applications, including many seemingly minor features that make a big difference when gensets are operated 24/7 instead of a few hours at a time in emergency standby service.
 They can modify the standard design and spec as desired for larger or smaller gensets.
@@ Line 9: / Line 11: @@
 The control panels are built by their Gen-Tec assembly shop in Latham, Missouri, and the gensets are assembled and tested with the control system in their factory in Ephrata, Pennsylvania.
-<box blue 40% round |**Martin Machinery**>
+<box blue 40% round |**Martin Energy Group**>
 Excelsior Dr \\ Latham, MO 65050 \\ United States \\
   * Contact: Bill Idlewine, Brian Martin or Harlan Martin
   * Tel: 660-458-7000
   * Fax: 660-458-7100
-  * [[http://www.rockanddirt.com/seller?method=show&amp;id=1389|Latham, MO]]
 W Mohler Church Rd.\\ Ephrata, PA 17522\\ United States \\
   * Tel: 717-738-0300
   * Fax: 717-738-4329
-  * www.martinmachinerypa.com
+  * [[http://www.martinenergygroup.com|www.MartinEnergyGroup.com]]
 </box>

MetaTek

User Tools

Site Tools

Differences

Page Tools